4x7m Bath cabin in 35mm logs

This log cabin has 35mm strong double tongue and groove interlocking logs

• Log cabin width: 4m, not including any roof overhangs
• Log cabin depth: 7m, not including front roof overhang (8m inc front canopy)
• Ridge height (gable roof): 2.5m
• Eaves Wall Height- 2.1m
• Front Roof Canopy- 1m (total cabin depth = 8m)
• Roof and floor boards - 19mm solid wood T&G boards (not sheet material)
• All of our log cabins of our cabins (excluding 28mm wall log thickness) are double glazed as standard

• Double glazed single windows 1230x710mm : 3
• Double glazed double doors, half glazed 1855x1565mm : 1
• Interlocking corner joints have double rebated and lapped connections for a weather-tight finish, far superior to a chamfered corner joint
• Double doors, fully boarded 1855x1565mm : 1
• 1 x 4m log wall partition
• Insulation kits available for all year round use
• Tanalised floor bearers spaced every 400mm thus providing a very strong floor
• This cabin complies with planning rules for outbuildings within 1m of the boundary

Extra Information & options

• Roof shingles, felt or Fixings
• Veranda
• All of our cabins are made to order, ensuring you have a cabin fresh off the production line rather than old stock stored for months in all conditions
• We are open 7 days a week for immediate advice should you require, whilst building on a weekend for instance
• The double tongue and groove wall logs are highly weather resistant to both rain and draughts
• All of the wall, roof and floor timbers used in our log cabins are solid boards, not finger jointed
• Our log cabins are measured log end to log excluding any roof canopies or overhangs
• Need advice? Call us on 01403 888222 for helpful and free advice 7 days a week

This cabin is divided into 2 rooms, the rear room being accessed via the front room and through the single door in the partition wall. The partition wall is in a standard position, but can be moved in either direction if required - please ring us if you aren't sure.