Log Cabin 5.5m x 4m Aspen Clockhouse Specification
This log cabin has 35mm strong double tongue and groove interlocking logs
-
Log cabin width: 5.5m (log end to log end, not including any roof overhangs)
-
Log cabin depth: 4m (log end to log end, not including any roof overhangs - 4m inc front canopy)
-
Ridge height (gable roof): 3.5m. (We are able to reduce the ridge height to 2.5m in order to comply with planning restrictions at no extra cost)
-
Eaves Wall Height- 2.2m
-
Number of rooms in this cabin- 1
-
Front Roof Canopy- N/A
-
Roof and floor boards - 19mm solid wood T&G boards (not sheet material)
-
All of our log cabins (excluding 28mm wall log thickness) are double glazed as standard
-
Ideal base size for this log cabin = 5.3m x 3.8m
Also Included With This Log Cabin
-
Double glazed single windows 1230x710mm : 8
-
Double glazed double doors, fully glazed 1855x1565mm : 1
-
Clocktower
-
Free clock supplied with this building
-
All doors are supplied with handles and high security Euro lock system
-
We can customise your cabin because they are all made to order
-
Insulation kits available for all year round use
-
Tanalised floor bearers spaced every 400mm thus providing a very strong floor
-
Please make sure that you allow for the roof overhangs at the side and rear of the cabin when you measure your plot
Extra Information & options available for this cabin
-
Factory applied Rystix timber preservative
-
Roof shingles, felt or Fixings
-
Base kit
-
Extra partition walling, doors and windows
-
Upgrade to 28mm floor boards from standard house strength 19mm boards
-
All of the wall, roof and floor timbers used in our log cabins are solid boards, not finger jointed
-
Our log cabins are measured log end to log excluding any roof canopies or overhangs
-
Need advice? Please call us on 01403 888222 for helpful and free advice any day of the week from cabin experts who have real experience – we aren't just sales staff selling a product that we've never seen or touched
-
More options and prices are listed below.................
One of the all time classic log cabin designs, and still a good seller. The ridge height of 3.5m means that it would need to be built more than 2m from any boundary unless planning permission was sought, but we can alter the roof pitch so that it comes down to 2.5m to avoid the need for planning permission.
Please Choose:
Black hexagonal
Green hexagonal
Red hexagonal
Black square
Green square
Red square
Recycled rubber roofing slates (50 year manufacturers warranty)
Red
Green
Brown
Not required
Column corners - fully boxed in log ends
Fire protection coating Class B - s1,d0 (ie better than UK Building regulations Class 0)
Stone pine
Teak
Mahogany
Nutwood
Chestnut
Palisander
Rustic oak
Light oak
Hemlock
Frisian blue
Salt green
Fir green
White
Silver grey
Clay grey
Window grey
Tuscany grey
Graphite grey
Sand grey
Mist grey
Platinum grey
Water grey
Anthracite grey
Granite grey
Ebony
Not required
Bundled discount paints deal! Big savings - save over 15%!
Cabin images on our website may also show optional extras (roof coverings, verandas etc). The paint colour images on our website may vary to the colour of treatment you purchase. You should try a sample pot first - paints & stains are non-returnable.
All surfaces (internal and external) of your log cabin must be painted with an appropriate timber treatment or sealer
Installation service for log cabins and timber buildings